ENVIRONEX SYNERGY SEALER – COMBINATION CONSOLIDATOR & SEALER
SYNERGY is a new generation penetrating liquid that consolidates, hardens and binds the surface of porous and friable masonry materials.
SYNERGY also possesses premium penetrating sealer properties to ensure maximum protection of the stone from permanent staining.
SYNERGY has been scientifically developed and laboratory tested against Australian Standards.
SYNERGY has been developed especially for use around all swimming pools to assist in prevention of salt attack and is warranted for a period of 2 years.
DIRECTIONS FOR USE:
ALWAYS TEST PRODUCT ON A SMALL AREA FIRST.
Ensure surfaces to be treated are dry, clean and free from residue.
Apply the first coat of SYNERGY to the masonry via lambswool applicator, brush or a low pressure Viton sprayer.
It is ESPECIALLY IMPORTANT to apply SYNERGY to all surfaces including underneath the pool coping. (Use DEFEND for dip-sealing purposes prior to laying to avoid adhesion issues.)
Apply the second coat when the first coat is dry, generally between 1-4 hours depending on ambient conditions.
Approximately 10 square metres per Litre, per coat.
2-3 coats are required depending on the porosity of the stone.
More porous masonry requires more coats for adequate protection properties.
The first coat will soak up more sealer per square metre than subsequent coats.
Regardless two coats will average out as above. Actual coverage depends on the absorbency of the masonry.
The denser the product the less sealer is required.
IMPORTANT NOTICE TO CUSTOMER
Since the use of this product is beyond the control of either seller or manufacturer, their only obligation shall be to replace any quantity of product, which is proven defective.
They cannot assume any risk or liability in excess of the purchase price of the product itself, which does not include labour or any consequential damages resulting from the use of this product.
Determining the suitability of this product for any intended use shall be solely the responsibility of the user.
ALWAYS TEST FIRST