Description
ENVIRONEX HI-LITE SEAL is a solvent-based sealant that can provide darkening of the surface without leaving a gloss.
It may cause some surfaces to become slippery, so if applying around pools, a test is recommended.
HI-LITE is best suited to pavers where a darker look is desired.
Application
Ensure the area to be sealed is clean and dry.
Newly laid pavers should be left to dry for 3-4 days prior to sealing.
Apply either by a heavy duty sprayer or a lambswool applicator.
Two even coats should be applied approximately 2 hours apart. It is common for the first coat to look patchy – any flat spots after 2 coats should have some more sealer applied.
Three coats may be necessary on very porous pavers.
More coats will result in more shine.
Allow 12 hours before walking on or using the surface.
Cleanup is in Klen Cyclone.
DIRECTION FOR USE
Coverage: 10 to 12 square metres per litre per coat
Re-Treatment: Hi-Lite Seal does not require stripping and can be re applied very easily.
Clean the area using Klen HD Cleaner and allow to dry. Apply one or two coats of Hi-Lite Seal depending on the wear and tear.
This should only be necessary every 2-4 years. (Less for commercial areas).
CAUTION
Avoid contact with skin and eyes and avoid breathing vapour or spray mist.
IMPORTANT NOTICE TO CUSTOMER
Since the use of this product is beyond the control of either seller or manufacturer, their only obligation shall be to replace any quantity of product which is proven defective.
They cannot assume any risk or liability in excess of the purchase price of the product itself, which does not include labour or any consequential damages resulting from the use of this product.
Determining the suitability of this product for any intended use shall be solely the responsibility of the user.
ALWAYS TEST FIRST.
Reviews
There are no reviews yet.